Brake Hardware

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter...

Stop Light Pressure Switch, dual pole with a 1/8th pipe male inlet. Circuit turns on at 60-100 psi. Used in part #260-11179 Combination Proportioning Valve assembly. Plated steel construction.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for GP320 Calipers.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used for GP320 Calipers.

Caliper wear plates are used to prevent pad “dig-in” and wear on aluminum bodies. Manufactured form stainless steel alloy for maximum abrasion resistance. This specific part number is used with D8-4 and D8-6 calipers

Replacement reservoir clamp Combination Remote & Tandem Remote Master Cylinders. Constructed from durable, high-strength steel.

Wilwood's Master Cylinder Bench Bleeding kit contains all fittings and hoses to properly bench bleed your master cylinder, either tandem or single outlet. Bench bleeding is a necessary to assure that system is completely bled and free from trapped air.

Replacement remote reservoir inlet adapter for Comapct Remote Master Cylinders. Constructed from durable, high-strength plastic.

Wilwood’s Axle Bearing retainers are used with axles that require positive bearing retention. Engineered from high strength steel alloy and e-coated for corrosion resistance.

Wilwood’s Axle Bearing retainers are used with axles that require positive bearing retention. Engineered from high strength steel alloy and e-coated for corrosion resistance.

Cable stop brackets for the current Wilwood Disc/Drum Parking Bake Kits. Steel construction with a plated finish

Wilwood’s Hex Head Cap Screws are manufactured from high strength alloy steel or stainless steel. Various plating methods are used depending on application.

Wilwood’s 12 point Locking Nuts are engineered from a high strength alloy and plated for corrosion resistance. Flanged heads widen the bearing area for an accurate torque loading.

Alloy Steel Double Ended Studs. Plated for corrosion resistance.