Brake Hardware

Caliper Bridge Spacer for Forged Dynalite / Billet Dynalite and NDL Calipers. Available in various thicknesses for .50” thru 1.25” rotor widths. Made from high strength aluminum alloy.

Rotor adapter for Wilwood’s Pro Street and Drag hubs. Adapter is supplied with a 5 x 3.88” bolt circle pattern for hub mounting and a 8 x 7.00” bolt pattern for rotor mounting. Made from high strength aluminum alloy.

Caliper Piston Knock Back Springs. Used in low brake pedal situations due to piston knock back caused by vibration, mount or spindle flex. Part # 300-2434 (1.22” diameter) is used with Wilwood’s conventional stainless steel pistons from 1.62” to 1...

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Wilwood Fitting Adaptor Brake Line Clip Bowed

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 12 lug (7.77’ Snap Ring) Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter...

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 8 x 7.00” dynamic or fixed bolt pattern for rotor mounting. Made from high strength...

Rotor adapter for Wilwood’s GEN II Sprint / Midget inboard hubs. Adapter is supplied with a rectangular 3.37” x 2.28” pattern for hub mounting and a dual 6 x 5.50” dynamic or fixed bolt pattern for rotor mounting. Made from high strength...

Dynamic Lug Rotor Mounting and Snap Ring Kit contains rotor wear plates and internal snap ring retainer to mount one 8 lug Dynamic Mount Rotor to a hat utilizing Wilwood’s Dynamic Lug Mount system.

Wheel Spacer and Hub Protector. With a wheel bolt circle of 5 x 4.50”/4.75”/5.00” and a 5mm (0.197’) thickness. Engineered from high strength steel alloy and with a plated finish.

Rotor and Hat Register Adapters are used to locate 1 piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00” to 2.88” internal diameter. Requires 3.06” center hole with counter...

Caliper Rebuild Kit for Dynapro Single and Dynalite Single Calipers with 1.75” pistons. Contains piston seals, wear plates, bleed screws, pad retainer and cotter pin to service both styles of calipers. Parts are sufficient for one caliper only.

Wilwood’s Tubular Bracket Spacers are used for spacing & offset changes on many applications available multiple diameters and lengths. Engineered from high strength aluminum alloy and finished with black e-coat finish.

Cable Clamp with neoprene cushion. Plated steel construction. And available in .312 and .375 diameter.