SPC Performance

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to ±1.0° camber change and up to...

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to ±1.0° camber change and up to...

With these shims you can correct both rear camber and rear toe on newer Volkswagens and Audis. By combining the shims (two may be used on each wheel) you can get up to ±1.0° camber change and up to...

Adjust rear toe on Honda Accord and Acura TL models with this fully adjustable control arm from SPC. This remove and replace arm provides +-3.0deg of adjustment and allows the installer to easily...

Replace corroded or damaged OE toe cam bolts on the rear of may late model Porsche vehicles with this replacement cam kit from SPC. This cam kit is designed to replace the factory adjusters and...

Make the non-adjustable lower control arms on your 996 or 997 Porsche adjustable for up to ±2° camber adjustment. This pair of 6061-T6 aluminum arms (2) from SPC will give easy on-the-car...

Used on any brake lathe and with any ventilated rotor, they suppress vibration and noise. Segmented silencer is made of the finest latex rubber tubing with four (4) steel tubes to quiet chatter...

These 9" steel adjusting sleeves are the perfect fit with our pivot studs and ball joint plates. California Residents WARNING

These arms lower your front end by 1" and add 1 degree positive caster for a ready-to-run aggressive stance. Optional Ride Height Tuning Kits are available for use with our Pro Series Springs or...

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to...

These Flat Coil Spring Mount/Spacer Plates are designed to maximize your ride height options. Use thse plates as coilover mounts to augment coil stability on SPC's tubular arms. If you need to...

Make rear camber adjustable on the Acura RDX with this adjustable lower control arm and replacement toe cam bolt kit from SPC. The adjustable rear lower control arm will provide +-2.0deg camber and...

Use this sliding balljoint to adjust camber on the rear of the Acura MDX for improved handling and tire wear. The OE quality balljoint is easily installed and corrects camber angles +-3deg...

Designed specifically for the Lexus GS & IS, this ball joint corrects camber up to +-1.5deg. With an OE quality replacement ball joint, this sliding plate assembly is perfect for vehicles that have...

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for Tacomas, PreRunners and 4-Runners. Featuring...