SPC Performance

The Cupped 90 Durometer Rubber Foot & Domed Target allows up to 30 degrees of JounceShock motion as your suspension travels and articulates. The 90 durometer rubber cup with stands high compression...

The Rubber Cupped Foot screws directly onto the shaft end of the JounceShock.The high durometer Cupped Foot is normally used in conjuction with the Domed Target(which is bolted or welded to the...

This fluid lubricates the 85125 rotary file set, and the 68670 Rotor-Bor to reduce stress on the cutting teeth. This product is highly recommended to prolong the life of all cutting bits used on...

When used with #499, this tool will pull most CV joints that use a hidden snap ring to hold them in the transaxle. Made to remove the transaxle assembly without damaging the transmission case or...

These exclusive kits provide a camber & caster change for DANA 60 axles. Replace the O.E. bushing with the correct eccentric bushing, rotate to adjust caster/camber and lock in place. These kits...

To correct camber remove the O.E. lower control arm attaching bolt and move arm away from the bracket. Using 73010 Punch, enlarge the hole in the bracket and re-attach the lower control arm using the...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.Installation Instructions

Lifted or lowered, factory cams don't give enough adjustment range on the Dodge Ram 1500 series of trucks. Gain 2.25deg of camber or caster with these offset ball joints. Simply replace the ball...

Replace coroded or damaged factory front camber and caster bolts on the Dodge Ram 1500 with these hex chromate free 700 salt spray tested cam bolts from SPC. This kit is sold per wheel and gives you...

These heavy duty bolts and brackets replace the upper control arm mounting bolts giving you both camber and caster adjustment. Kit includes 2 cam and bolt sets to cover one side of the vehicle...

These heavy duty bolts and brackets replace the upper control arm mounting bolts giving you both camber and caster adjustment. Kit includes 2 cam and bolt sets to cover one side of the vehicle...

Replace the non adjustable or corroded OE bolts on Dodge 3/4 and 1-ton trucks to get +- 1.5 deg degrees of caster and pinion angle change. Whether the truck is lifted or stock ride height, optimize...

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up...

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up...

These HD 'King Pin' style joints replace the original sliding-ball design upper joints on late-model 4500 and 5500 Dodge trucks and rebadged Sterling Bullets. They provide independent adjustment up...