Edelbrock

The Edelbrock High-Flow EFI Intake Elbow #3815 is intended for very high-power naturally aspirated EFI applications and turbocharged or centrifugal-supercharged engines making over 1,100 horsepower...

The Edelbrock 3814 Intake elbow was developed by the Edelbrock engineering team using the latest in Computational Fluid Dynamic (CFD) software. Edelbrock Throttle Body Elbows are the best way to...

The Pro-Flo XT Chrysler 440 #7144 EFI intake manifold is engineered with a large plenum and long tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range 1500-7000...

Edelbrock part #7139 Pro-Flo XT LS1 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000...

Edelbrock part #71393 Pro-Flo XT LS1 EFI intake manifold is engineered with a large plenum and tapered runners to deliver maximum horsepower and broad torque band throughout the rpm range (1500-7000...

Edelbrock Manifold Absolute Pressure Sensor is for use with first generation Edelbrock Pro-Flo EFI systems.Warranty

Edelbrock PCV Valve #3592 PCV is for use with EFI systems. Suitable for low vacuum camshafts, this PCV valve opens later than most, so the PCV is not open during idle or tip-in.

Edelbrock part #3586 Pro-Flo EFI Fuel Pump Relay. Edelbrock Pro-Flo fuel pump relays can help restore proper function to your Pro-Flo EFI system so that it can perform its optimum bestWarranty

The Edelbrock #38783 Victor EFI 4-Barrel Throttle Body complements our Victor EFI line of manifolds. This throttle body mounts on a standard 4150-style square-bore carburetor bolt spacing. It is sand...

The Edelbrock 38353 adapter kit is required to install our Performer 5.0 PN 3821 or Performer RPM PN 7126 in 1994 and 1995 Mustangs. The 1994-1995 throttle body has a different bolt flange and idle...

Constructed from billet aluminum, the new Edelbrock 90mm Victor Series Pro-Flo XT(TM) Throttle Body, complete with TPS and IAC, maximizes performance upgrades on all Pro-Flo XT, EFI Victor Elbow, and...

The Edelbrock 90mm single bore throttle body is intended for Pro-Flo XT and EFI Victor Elbow applications. It has provisions for either LS1 or LS2 mounting bolt patterns. The throttle body uses LS1...

Edelbrock Part #15834 Remote Oil Filter Mounting Kit is necessary when installing the new Edelbrock supercharger in a '04-'10 Ford F-150, '06-'08 Lincoln Mark LT or '07-'11 Expedition/Navigator...

Edelbrock EGR Adapter #1476 has made installing your new intake and carburetor easier when using part #3701 and #3706. When using Edelbrock EGR adapters, your existing EGR valve is repositioned to...

The Edelbrock #1932 Hot Air to Electric Choke Kit converts your Q-Jet hot-air style choke into an electric choke.WarrantyInstallation InstructionsInstallation Instructions