Edelbrock

Edelbrock part #4202 Elite Series Tall Breather is a top mount bolt on design which uses both the existing valve cover breather hole and two bolts for secure mounting. The lid is removable for oil...

Edelbrock part #4201 Elite Series Breather is a side mount bolt on design. The lid is removable for oil fills, and the lower housing contains a reticulated foam element to allow gases through while...

The Edelbrock #7726 End Seal Spacers 2 pair required for Victor Ford heads (#77219,#77099,#61099, #61219)Warranty

Edelbrock part #8087 is a -6AN x 5/8"-20 Fuel Inlet Fitting for Edelbrock Square-Bore & Carter AFB Carbs. This fuel inlet fitting is designed to replace the EPS carburetor's existing fuel inlet...

Edelbrock part #7281 Exhaust Gaskets are designed for 1961-79 Pontiac 326-389-400-421-428-455 V8 engines. These Exhaust Gaskets are made of EnCore HTX-900; a high-density non-asbestos fiber/metal...

The Edelbrock #9706 Manganese-Bronze Exhaust Valve Guide is for Edelbrock Small-Block Ford Victor Cylinder Heads. Set of 1Warranty

The Edelbrock #93663 Exhaust Valve is a 1.76" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60669 & 60689 Cylinder Heads. Overall...

The Edelbrock #9703 Manganese-Bronze Exhaust Valve Guide is for Edelbrock Big-Block Chevrolet Cylinder Heads. Set of 1Warranty

The Edelbrock #9714 Exhaust Valve Seat is a Replacement for Edelbrock Pontiac Cylinder Heads with 1.66" Exhaust valves. Set of 1Warranty

The Edelbrock #9719 Exhaust Valve Seat is a Replacement for Edelbrock Ford FE Cylinder Heads with 1.66" Exhaust Valves. Set of 1Warranty

The Edelbrock #93664 Exhaust Valve is a 1.76" 1-piece, swirl-polished, hardened tip stainless steel valve with undercut stems for increased flow. Fits Edelbrock #60669 & 60689 Cylinder Heads. Overall...

Edelbrock part #8727 spacer kit includes a 7/16" thick spacer and two .045" thick gaskets for a total thickness of 1/2". The kit also has new base to upper fasteners to accommodate the spacer. There...

Edelbrock part #8728 spacer kit includes a 7/16" thick spacer and two 3/64" thick gaskets for a total thickness of 1/2". The kit also has new base to upper fasteners to accommodate the spacer. There...

Edelbrock part #3577 Regulator Fitting is a -6 AN fuel inlet fitting is for use with fuel mounted regulators that come included with all Pro-Flo EFI systems. The fitting will screw directly onto the...

Edelbrock part #8080 Brass Hose Fitting is a 1/4-18" NPT fitting with a 3/8" barb. This Fitting will fit the rear vacuum port of all Edelbrock four-barrel carbs.Warranty