Tools

This custom tool makes adjusting th OE camber cams on the rear of Audis a snap. Even with tires on and the suspension loaded you will be able to access and tighten the nut. Simply loosen the cam bolt, adjust the camber bolt with the bolt's hex pilot,...

Quickly and easily adjust rear toe on BMW 3-series (E36) models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on these BMW vehicles and save time on every alignment. Equivalent to...

Quickly and easily adjust rear toe on BMW 3-Series (E46) and Z4 models with this tool from SPC. Simply use your 1/2" drive socket wrench to drive change on the rear toe adjustment brackets on these BMW vehicles and save time on every alignment...

Save time and make adjusting front camber and csater a one- person job on popular GM platforms with this turnbuckle design tool. Simply attach the tool to the front lower control arms and dial in finite changes on GM mid-size SUV's the Chevy SSR and...

A must for every alignment tech, this spec book lists all major alignment angles for all vehicles from 2013-2023. Front caster, camber and toe, rear camber and toe, along with SAI and turning angle are presented in an easy to read format. Also included...

Turn any 9/16" [14 mm] hole into a precise and clean 16mm slot in your subframe clevis or axle brackets. The tool is designed to cut up to 10 ga mild steel. The low profile enables it to fit into spaces less than 1.5" [38mm]. Use this tool to quickly and...

These wrenches make presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. California Residents WARNINGInstallation Instructions

These wrenches makes presetting our adjustable truck sleeves (24160,24180,24120,24130) easier for the installer. When using the 74400 wrench it is recommended that the opening be equally positioned over the slot opening of the sleeve body. California...

This special 10 point socket is needed when removing the O.E rear lower control arm on new 2001 to 2006 Honda Civics, 2003 and up Elements, 2002 to 2006 CRV's and 2002 to 2007 Acura RSX's. Included with part numbers 69300 and 69400. California Residents...

The Honda Accord and Acura TSX Rear Adjustable Trailing Arm is an ideal replacement for a damaged OE component, Additionally, it will provide +-1" set-back/wheel base adjustment. This arm is necessary to to correct set-back changes that the 67545...

Red print on white base-1.5" X 5" vinyl sticker that proclaims you have the best in performance alignment. These stickers look great whether you use them for your windshield, side window or just to put on your tool box.

Our patented thrust alignment plate will allow for corrections of setback and thrust angle on most vehicles with rear leaf springs. Installation is made by loosening the U-bolts holding the leaf spring to the axle, installing the alignment plate...

This wrench makes it easy to adjust the control arm cams on many modern GM and Chevy HD Trucks. The tool surrounds the entire perimeter of each cam to provide a no slip means to reach the hard-to-reach and often rusty OE cams. California Residents...

Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommended when installing our 25430, 25435, 25440 and 25445 replacement...

This economical tool fits most cars & light trucks with split tie rod sleeves. Double-end feature makes 360 degree turns possible. California Residents WARNINGInstallation Instructions