Tools

This wrench makes it easy to adjust the control arm cams on many modern GM and Chevy HD Trucks. The tool surrounds the entire perimeter of each cam to provide a no slip means to reach the hard-to-reach and often rusty OE cams. California Residents...

Use this press tool to remove stuck OE cam sleeves from Toyota trucks. The extended length forcing screw allows you to remove the sleeve without removing the steering rack. Recommended when installing our 25430, 25435, 25440 and 25445 replacement...

This economical tool fits most cars & light trucks with split tie rod sleeves. Double-end feature makes 360 degree turns possible. California Residents WARNINGInstallation Instructions

This easy to use valve stem puller protects the wheel and rim while you get the job done quickly. Simply screw the pivoting head onto the valve stem, slide the hard rubber protecting block to the edge of the wheel rim, and remove the stem without rim...

This two-piece internally threaded spring compressor is a great option for MacPherson Strut, coilover, and other sccessible springs. With 1-11" of travel and a 2645 lbf (1200kg) max qoekinf load with a 3X safety factor, this is an ideal tool for almost...

Use this tool to safely and easily expand steering knuckles. Pry bars can damage the knuckle, but this tool allows safe expansion with the tool adjustment nut. Designed to operate within a 4.4 - 10mm range, this expansion tool will fit most makes and...

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off-center" or clocked position. The 32115 is for Ford F450/550 Super Duty. These tools slide directly over...

Stop wheel hop and vibrations on hub piloted wheels! Hub pilot hole diameter tolerances can allow wheels to be installed and tightened in an "off center" or clocked position. The 32111 threadless wheel centering tool set (3) fits 22mm studs on Heavy Duty...

Using a shop press, the tool is designed for quick, easy removal & installation of xAxis sealed flex joints with 40mm OD and up to 60mm wide; including part numbers 15623, 15625, 15627, 15629, 15631, 15633, 15635, 15637, 15639, and 15643. California...

Improve droop travel, drivability and tire wear as well as adjusting tire position in your wheel well with SPC's adjustable front upper control arms for the Frontier, Pathfinder, and Xterra. Featuring our long life maintainable ball joint and SpecRide...

The upper control arm ball joint pinch bolt on the popular Audi A/S 4, 5, 6, and 7 models is frequently corroded and must be cut out when removing or replacing the upper arms. This bolt & nut replacement kit has 720 hour saltspray certified coating to...

Product appearance and features may vary in the market as design changes, improvements and modifications are implemented.

LEFT HAND TOOL HOLDER 3/8" Square Shank Fits Ammco model 7000 Disc Rotor Lathe and 3000, 4000, 4100 Drum Lathes and Hoffman model 660. Complete with one Carbide Insert No. 062--- California Residents WARNINGInstallation Instructions

Moroso Degree Wheel - 18in

The Hotchkis GM upper trailing arm bushing install and removal tool allows for easy removal and installation of new bushings in GM 10 and 12 bolt rear ends commonly found in GM A-Body vehicles. This tool makes a great addition to any professional or...